1999-2007 Chevy Silverado GMC Sierra…

$17.35

Buy on Amazon

Description

Item Description:Aftermarket OEM Replacement Textured Black Tail Gate Door Handle with Bezel Cover Set 100% Brand New !! Direct Replacement Built to strict quality control standards Fits OEM Part Numbers: Handle: 15997911 Bezel Cover: 15228539 , 19120859 Fits Model and Year:1999 2000 2001 2002 2003 2004 2005 2006 2007 99 00 01 02 03 04 05 06 07 CHEVROLET CHEVY SILVERADO ( NON SS Model ) / GMC SIERRA

Reviews

There are no reviews yet.

Be the first to review “1999-2007 Chevy Silverado GMC Sierra…”

Your email address will not be published. Required fields are marked *

10 Reviews from Amazon


  1. 5 out of 5

    FIts 2004 Silverado |
    Verified Purchase

    I ordered on Sunday and it arrived on Thursday. Removal procedure: Use some king of rust breaker liquid on the old bolts if they are tight. Pull off the old bezel (mine was already broken off) Rotate the plastic rod clips down. Pull the rods out of the latch. They are long enough that you don't have to worry about them falling into the tailgate. Use a 13mm socket to remove the three bolts that hold the latch on. Installation: Bolt the latch on. Push the rods into the latch and rotate the new clips (supplied) upward. I used a long-nosed pliers to get the clip to snap on. Use alcohol to remove any remnants of the old two-sided foam. Remove the paper from one side of the foam on the new latch. Position the bezel over the latch. Set the bottom tabs of the bezel into the holes in the tailgate and snap the bezel in. It looks and works fine.
  2. 5 out of 5

    Nice easy replacement |
    Verified Purchase

    This product arrived a couple of days earlier than amazon indicated it would, which was nice. It also does come with the tailgate rod clips...it was unclear from the product description whether those were included or not, but they are. It took me 10 minutes to install and was very easy, you just have to be careful when clipping the rods in not to break the plastic clips. Everything seems on par with the original parts quality-wise, which means the plastic clips could break and you must be careful when removing the bezel. But for the $20 price I am very satisfied.
  3. 5 out of 5

    Easy, perfect fit and fast |
    Verified Purchase

    The parts came a day before they were scheduled to, which made me happy by itself. These parts only took me about 3 minutes to install and snapped into place perfectly. I haven't had a problem with them at all and I am very satisfied. These parts were also about 25%-50% cheaper than the next two lowest priced quality parts. It looks and feels just like the original, a good deal.
  4. 5 out of 5

    good aftermarket product for a decent price |
    Verified Purchase

    so the handle broke off the gate latch on my '03 silverado. i didn't want to use pliers to pull the rod every time the gate needed opening, so i thought i'd give this replacement a try. installation was about as easy as it gets (except that the rods didn't want to snap into the clips, which means they probably won't let go after installed) and in about 10 minutes, i had a fully-functional gate latch. the mounting bracket is a all metal, and the latch handle is plastic, pretty much exactly like the oem latch. the plastic cover snapped in place over the opening, but it doesn't fit quite as tightly as the oem. there's just a tiny bit of slop in it, and you can see a small line around the outside where the ever-so-slightly larger cover had rubbed down the paint. it's hard to notice though, unless you get right up on it. for $15 parts, i'm very pleased so far. we'll see if it snaps off in the bitter cold of this winter...
  5. 5 out of 5

    Great part, very sturdy |
    Verified Purchase

    Great part, very sturdy, and simple to install. The most complicated part of the install was removing the liner from my tailgate so I could access the bolts that hold this handle on, but once those were out it was easy to line this up and get it set into place. It's only been installed for about a month now, but it seems to be holding up very well. I was worried it might be made of cheap plastic that could succumb to the weather, but the mounting plate is solid metal and painted black to prevent rust, while the handle itself feels like a very heavy duty plastic. My last handle was only needing to be replaced because one of the retaining clips popped off that held the little bars in place to open the tailgate, this handle seems to have very sturdy plastic clips that function somewhat differently, so I'm much less worried about it happening again.
  6. 1 out of 5

    Seems very brittle. Bezel broke during installation. |
    Verified Purchase

    Bezel broke when I installed it. I had to used original. Plastic seems very brittle and I'm concerned it will not make it through cold winter. If Bezel is any indication of the quality and strength of the handle itself, I may need a back up.
  7. 5 out of 5

    This tailgate gate door handle fits like a glove |
    0

    This tailgate gate door handle fits like a glove. It's perfect. I'm sorry I go around town all the time and see tailgates without the trim to the handle or the handle jacked up. This is cheap and to me makes the pickup 100% more attractive by far.
  8. 3 out of 5

    Bezel broke right away. |
    Verified Purchase

    The bezel broke almost immediately. I used this or a 2003 Chevrolet Silverado 1500 Z71. The handle portion lines right up to the factory holes and the wires to actuate the tailgate locks. It looks good. Unfortunately, as mentioned, the bezel broke on my first try. I ordered another bezel off Amazon for $6. I would not try and dissuade anyone for buy this product, just be careful when attaching the bezel; it's only held in place by plastic tabs.
  9. 5 out of 5

    Perfect fit for 2004 Silverado Z71 |
    Verified Purchase

    Easy DIY job to fix a tail gate that was having problems latching. The OEM one had rusted and was binding. Installed on a 2004 Silverado Z71 in about 20 minutes. Removed the old plastic tailgate latch cover, removed 3 bolts holding it in and undid the 2 clips connected to the latch rods. Install was the same in reverse, only took time to put some white lithium grease on the new one. OEM latch lasted 11 years more or less so its probably the last time I'll have to deal with this problem. Item shipped same day as ordered. Received it a couple days later, very fast. Price was right too. Now I dont have to worry about my tail gate opening while going down the road.
  10. 5 out of 5

    good value and an easy fix, check your hinges and gate cables. |
    Verified Purchase

    Much higher quality than the OEM piece, the part is well made and works perfectly. The lock rod clips are slightly different than the GM ones but I'd say they are better quality. The bezel fits well and matches the OE training of the plastic pretty well. It's also nice that it's included in this kit because the retainer tabs will break even if you're careful. Short of taping it back on with 2 sided tape, you'll need a new one. One more note I used this kit for a 2004 chevrolet Silverado 1/2 . Check your tail gate cables as well! GM recalled a lot of years of these trucks for the tail gate cables failing. If you're sitting/stand on the tailgate and a cable breaks it can be dangerous.